Setting The Beep Tone; Setting The Auto Audio Mix Function; Setting Appradioone Sound; Setting The Rear View Camera - Pioneer AVH-X7800BT Manuel Du Propriétaire

System settings

Setting the beep tone

The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
35
2 Touch [Beep Tone] to switch "On" or "Off".
Setting the auto audio mix
function
You can select whether or not to activate the auto audio mix
function. If the auto audio mix function is activated, this prod-
uct automatically switches between mixing or not mixing the
AV source sound and the sound output from your iPhone or
smartphone according to the mixing property, such as that of the
mixed sound or solo sound of the foreground application on your
iPhone or smartphone.
The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
35
2 Touch [Auto Mix] to switch "On" or "Off".

Setting AppRadioOne Sound

You can set where the sound for AppRadioOne is output when it
is used with an Android device.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
35
2 Touch [Input/Output settings].
3 Touch [AppRadioOne Sound].
4 Touch the following settings.
 AVH (default):
The sound is output from the speakers of this unit.

Smartphone:
The sound is output from the speakers of the Android device.
p With an iPhone, the sound is always output from the speak-
ers of this unit.
36

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required
for utilizing the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the shift lever is in the REVERSE (R) position.
Camera for Camera View mode
Camera View mode also allows you to check what is behind you
while driving.
To display the camera image, touch [Camera View] on the "AV
source selection" screen.
 Refer to Source on the AV source selection screen on page
12
p To set the rear view camera as the camera for Camera View
mode, set "Back Camera Input" to "On".
 Refer to Setting rear view camera activation on page 36
CAUTION
Pioneer recommends the use of a camera which outputs
mirror reversed images, otherwise the screen image may
appear reversed.
p Immediately verify whether the display changes to a
rear view camera image when the shift lever is moved to
REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in "Camera Polarity".
p If you touch while the camera image is displayed, the
displayed image will turn off temporarily.
Setting rear view camera activation
The default setting is "Off".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
35
2 Touch [Camera settings].
3 Touch [Back Camera Input] to switch "On" or
"Off".
Setting the polarity of the rear view
camera
p This function is available when "Back Camera Input" is
"On".
 Refer to Setting rear view camera activation on page 36
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
35
2 Touch [Camera settings].
3 Touch [Camera Polarity].

Battery (default):
The polarity of the connected lead is positive.
 Ground:
The polarity of the connected lead is negative.

Setting the demo mode

The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
35
2 Touch [Demo Mode] to switch "On" or "Off".

Selecting the system language


If the embedded language and the selected language setting
are not the same, text information may not display properly.
 Some characters may not be displayed properly.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
35
2 Touch [System Language].
3 Touch the language.
After the language is selected, the previous screen returns.
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadioOne by setting the
language of the keyboard for iPhone.
p This function is only available in AppRadioOne on the
iPhone.
1 Display the "System" setting screen.