Installation - Medion LIFE P62024 Manuel D'utilisation

Installation

We recommend that the device is installed by a trained technician. This ensures that
the device will work perfectly. Incorrect cabling may result in damage to the device
and your car. If you wish to install your car radio yourself, please refer to the installa-
tion and connection instructions in this manual.
WARNING!
Disconnect the minus pole from the car battery before installation!
There is a risk of short-circuit and electric shock!
• Check whether the terminal assignment of your vehicle matches the assignment of
the car radio.
• Do not install the cables under tension, across sharp edges or close to parts that
could heat up. Make sure you do not kink the cables or twist them.
• Insert the device into the proper slot or choose an installation location that will not
affect the driver's normal ability to drive.
• Connect the cable briefly before finally installing the device. Ensure it has been con-
nected correctly and that the system is working properly.
• If changes have to be made to the vehicle, consult your vehicle dealer/specialist
workshop.
• Your warranty will be invalidated if you disconnect the adapter socket from the ca-
ble or cut the cable!
• Make sure that the device is installed in such a way that injuries cannot occur due
to heavy braking.
• Avoid installing the unit near strong heat sources (e.g. direct sunlight or heating
air), dust, pollution or excessive shocks. This could damage the device.
• You must follow these instructions precisely during the assembly. Before reconnect-
ing the car battery, check all of the connections.
DE
EN
FR
NL
IT
ES
DK
49