Technical Support - Siemens SIPART PS2 6DR5 Serie Notice De Service

Ambient temperature
Enclosure
•
Weight, basic device
Torque for cable gland nut made of plastic
Electrical data
For connecting to circuits with the
following peak values
Certificates and approvals
CE conformity
Explosion protection
Explosion protection in accordance with
Intrinsic safety "ia"
Intrinsic safety "ic"
Non-sparking "nA"
Permissible ambient temperature
A Appendix
A.1 Certificate
The certificates can be found on the enclosed CD and on the Internet under:
Certificates (http://www.siemens.com/processinstrumentation/certificates)
A.2

Technical support

Technical Support
If this documentation does not provide complete answers to any technical questions you may have, contact Technical
Support at:
● Support request (http://www.siemens.com/automation/support-request)
● More information about our Technical Support is available at
Technical support (http://www.siemens.com/automation/csi/service)
58
In hazardous areas, observe the maximum permissible
ambient temperature corresponding to the temperature
class.
Makrolon® glass-fiber reinforced polycarbonate (PC)
Approximately 0.9 kg (1.98 lb)
2.5 Nm
U = 5 V
i
I = 100 mA
i
P = 160 mW
i
C = negligibly small
i
L = negligibly small
i
The applicable directives and applied standards with their revision levels can
be found in the EC declaration of conformity on the Internet.
Ex markings
ATEX
Zone 1:
II 2 G Ex ia IIC T6/T4 Gb
Zone 21:
II 2 D Ex ia IIIC T110°C Db
Zone 2:
II 3 G Ex ic IIC T6/T4 Gc
Zone 2:
II 3 G Ex nA IIC T6/T4 Gc
T4: -40 ... +90 °C (-40 ... +194 °F)
T6: -40 ... +60 °C (-40 ... +140 °F)
SIPART PS2 (6DR5...)
A5E03436620-07, 10/2015