afriso DIT 10 Notice Technique page 47

E
5.7 Mounting with cable gland kit
Use threaded socket in the tank for mounting.
1. Route the cable of the pressure sensor trough the cable gland.
- For mounting to the tank, use the appropriate parts of the cable gland
kit required for your specific tank.
2. Determine the cable length as described above.
3. Tighten the cable gland so that the cable can no longer be moved and that
the connection is odour-tight.
Mounting
5. At the cable gland, adjust the
cable length of the sensor cable in
such a way that the tip of the pres-
sure sensor reaches the tank bot-
tom.
 Verify that the pressure sensor is
not submerged in sludge.
6. Only fit the withdrawal hose (E)
after the pressure sensor is in the
tank.
7. Tighten the cable gland so that
the cable can no longer be moved
and that the connection is
odour-tight.
EN
17
DIT 10