afriso DIT 10 Notice Technique page 46

5.6 Mounting the pressure sensor
 Verify that zero calibration has been performed.
A
Mounting
C
B
D
1. Plug the star (B) onto the pressure
sensor (C). Note the position of
the ribs at the star.
2. Use the spacer (A) to screw the
star (B) to the pressure sensor
(C).
3. Bend the arms of the star over the
spacer.
4. Push the pressure sensor from
the top though the tank connec-
tion thread (D).
EN
16
DIT 10