Parking Brake; Locking The Front Wheels; Seat Belt - JANE TwinLink Mode D'emploi

!
WARNING: It is essential to make sure that the child is kept
at a safe distance from the pushchair when folding or un-
folding it. Sharp points and areas where fingers could get
trapped are inevitable during these operations.
D. PARKING BRAKE
BRAKE: Press the lever downwards with your foot to put the park-
ing brake on your pushchair.
RELEASING THE BRAKE: Use your foot to press the lever upwards
to take the parking brake off.
! WARNING: When the brake is on make sure that the push-
chair has braked correctly. It may be necessary to push the
pushchair slightly for the brake to be fully activated.
E. LOCKING THE FRONT WHEELS
Your pushchair is fitted with front swivel wheels that can be locked
if you prefer.
To lock them, push the lever between the wheels downwards.
24
EN
.a
6
6 . b
To unlock the front wheels, pull the lever upwards.
!
WARNING: Keep the swivel axle free from dust to ensure a
smooth, long-lasting swivel action.
F . SEAT BELT
Your pushchair is fitted with a safety harness to keep your child safe
at all times.
You should adjust the strap height of the safety harness in line with
your child's height.
Pass the shoulder strap through the appropriate slot in the seat.
Make sure that it is securely fastened.
To unfasten the belt system press the button in the middle of the
harness until the straps come undone.
To fasten the harness bring the ends of the buckles together and
insert them into the fastener until you hear them click locked.
.b - .c
9
Adjust the straps so that they fit the child correctly with the right
tension. To adjust the length of the straps, slide the buckles up or
down. Make sure that the straps are not twisted.
7 .a
7 .b 14-14a
8
9 .a
9
10