Using The Parking Brake; Locking The Front Wheels - JANE KENDO Mode D'emploi

It is possible to remove the seat if you want to fold the pushchair up
smaller and make it easier to manoeuvre
Unfasten the handlebar levers and slide it downwards.
Turn the right handle a
5
lebar upwards to make it easier to unlock.
Lift the pushchair by the handle on the central tube of the chassis
until the pushchair is fully folded
carry strap found on the handlebar.
For it to fold up as small as possible, the seat of your KENDO should
be fitted in the forward facing position on the chassis
should be fully folded c. Follow the same steps as before.
16
WARNING: You must make sure that the child is kept at a safe
distance during the folding and unfolding operations. Sharp
!
points and areas where fingers could get trapped are inevitable
during these operations.
D. USING THE PARKING BRAKE
BRAKE: Press the lever downwards with your foot to put the parking
brake on your pushchair.
7
26
EN
.
10
12 a-12 b-12
and pull both side catches lifting the hand-
b
5
a- b and then secure it with the
6 6
b
3
b and the hood
9
a
RELEASING THE BRAKE: Use your foot to press the lever upwards, to
take the parking brake off.
c
WARNING: When the brake is on make sure that the pushchair
!
has braked correctly. It may be necessary to push the pushchair
slightly for the brake to be fully activated.
E. LOCKING THE FRONT WHEELS
Your pushchair is fitted with front swivel wheels that can be locked if
you prefer.
To lock them, press the button catch found above each front wheel
set. a
8
To unlock the front wheels, pull the button upwards.
WARNING: Keep the swivel axle free from dust to ensure a
!
smooth, long-lasting swivel action.
a
7
b
8