Mechanical Construction - Endress+Hauser iTEMP HART TMT142 Manuel De Mise En Service

Technical data
Climate class
Degree of protection
Shock and vibration resistance
Electromagnetic compatibility
(EMC)
Condensation
Installation category
Pollution degree
Design, dimensions
Weight
Material
Terminals
84
As per EN 60 654-1, Class C
IP 67, NEMA 4x
3g / 2 to 150 Hz as per IEC 60 068-2-6
Interference immunity and interference emission as per EN 61 326-1 (IEC 1326) and NAMUR NE
21
0.08...2 GHz 10 V/m; 1.4...2 GHz 30 V/m to EN 61000-4-3
Permitted
I
2
10.0.6

Mechanical construction

Die cast aluminum housing for general purpose or as option stainless steel housing
Fig. 13: Dimensions in mm (and inches in brackets)
• Display rotatable in 90 stages
• Approx. 1.6 kg (3.53 lb) (aluminium housing)
• Approx. 4.2 kg (9.26 lb) (stainless steel housing)
Housing
Die-cast aluminum housing AlSi10Mg with powder coating
on polyester basis
Stainless steel 1.4435 (AISI 316L)
Cables / wires up to max. 2.5 mm
Nameplate
Aluminum AlMgl, anodized in black
1.4301 (AISI 304)
2
(AWG 13) plus ferrule
TMT142
Endress+Hauser