Program Overview; Safety System; Cleaning And Care - WMF Lumero Multi-kettle Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14

Program overview:

Button
Program
Temperature
Boiling water
100°C or 212°F
Keep warm (e.g. for
40-90°C or
chocolate fondue)
104-194°F
Making tea
40-100°C or
104-212°F
Making yoghurt
42°C or 108°F
Warming babyfood
38°C or 50°C
or
100°F or 122°F

Safety system

A thermostat protects the kettle from overheating due to accidental operation without water by
switching off the appliance. It is essential to allow the kettle to cool down before filling with water.
Should the first thermostat malfunction due to improper use, an additional temperature regulator
provides reliable protection.

Cleaning and care

Disconnect the mains plug and allow the appliance to cool down.
Do not immerse the appliance in water, but rather clean it using a damp cloth and a little washing-up
liquid, then dry it.
Do not use harsh or abrasive cleaning agents.
The inside of the kettle should be cleaned with warm water and a washing-up brush. To do this, first
remove the lid (2), glass insert (6) and tea strainer (4). The sealing ring (7) can also removed. We rec-
ommend cleaning the kettle (8) after each use to prevent tea deposits from forming. You can descale
the kettle for more stubborn stains or limescale build-up. (see the chapter entitled "Descaling").
WARNING: Never clean the kettle under running water.
22
Time
After reaching the temperature, the
appliance turns itself off automatically.
Can be set from 5 minutes to 8 hours.
Can be set from 30 seconds to
15 minutes.
Can be set from 1 to 24 hours.
Can be set from 5 minutes to 2 hours.
Dishwasher safe
Cap (1)
Lid (2)
Tea strainer holder (3)
Tea strainer (4)
Glass insert cover (5)
Glass insert (6)
Sealing ring (7)
Glass kettle (8)
Base (10)
Can be rinsed
Wipe with a
under running
damp cloth
water
23

Publicité

Table des Matières
loading

Table des Matières