Speaker System - Sharp CD-BA3100 Mode D'emploi

■ Speaker system

Left speaker
3
1
4
2
Right speaker
3
1
4
2
1.
Subwoofer
2.
Bass Reflex Duct
3.
Tweeter
4.
Woofer
5.
Speaker Wire for SUBWOOFER Terminals
6.
Speaker Wire for MAIN Terminals
5
6
5
6
Speaker grilles are removable:
Make sure nothing comes into contact with the speaker
diaphragms when you remove the speaker grilles.
Placing the speaker system:
The left and right speakers have individual
shapes. For best performance, place the
speakers according to the illustration on the
right.
Bi-amp system:
Each speaker unit has a built-in subwoofer (low frequency range) which is driven
separately from the woofer and tweeter (mid-to-high frequency range). Two indepen-
dent amplifiers which have individual frequency characteristics are used.
By amplifying separately the two frequency bands, clearer sound is achieved.
Power amplifier
Tweeter
Sub-
woofer
Woofer
Power amplifier
Left speaker
Right speaker
Mid-to-high range
(200 Hz - 20 kHz)
Pre-amplifier
L-ch
Pre-amplifier
Ultra-low range
(60 Hz - 200 Hz)
ENGLISH E-6