Sharp CD-BA3100 Mode D'emploi page 15

7
0/R ( R 0 R) button to start playback. R
Press the
●
Playback will begin from track 1 on the DISC 1.
After that disc finishes playing, the next disc will automatically start playback.
●
When the last track on the DISC 6 has finished playing, the CD player will
stop automatically.
●
When there is no CD in one of the disc tray 1 - 6 positions, that position will
be skipped and the next CD will be played.
To interrupt playback:
Press the CD 6 button on the remote control.
To resume playback from the same point, press the 0 R button.
To stop playback:
Press the ■ (CD ■) button.
To exchange other CDs while playing a disc:
Press CD eject button for any stopped CD from s 1 7 to s 6 7 and exchange discs.
To remove the CDs:
Whilst in the stop mode, press the CD eject button for any CD from s 1 7 to s 6 7
to remove the disc.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Caution:
●
Do not place two CDs in one disc tray.
●
Do not push the disc tray whilst it is moving.
●
If the power fails whilst the tray is open, wait until the power is restored.
●
If the disc tray is stopped forcibly, "ER-CD10" will appear in the display and the unit
will not function.
If this occurs, press the ON/STAND-BY button to enter the stand-by mode and then
turn the power on again.
●
If TV or radio interference occurs during CD operation, move the unit away from the
TV or radio.
●
If a disc is damaged, dirty, or loaded upside down, the disc will be skipped.
■
To locate the beginning of a track
To move to the beginning of the next track:
Press the 2 / 4 button for less than 0.5 seconds during playback.
You can skip to any track by pressing the 2 /
●
4 button repeatedly until the desired track num-
ber appears.
To restart the track being played:
Press the 3 / 5 button for less than 0.5 seconds during playback.
●
You can skip to any track by pressing the
3 / 5 button repeatedly until the desired track
number appears.
Note:
You can locate the beginning of a track on a single disc only.
■
To locate the desired portion
For audible fast forward:
Press and hold down the 2 / 4 button during playback.
For audible fast reverse:
Press and hold down the 3 / 5 button during playback.
Notes:
Normal playback will resume when the 3 / 5 or 2 / 4 button is released.
●
●
You can locate the desired portion on a single disc only.
●
When the end of the last track is reached during fast forward, "DISC END" will
appear on the display and CD operation will be paused. When the beginning of the
first track is reached during fast reverse, the disc will start playback automatically.
ENGLISH E-14