Programmed Play - Sharp CD-BA3100 Mode D'emploi

Programmed Play

Up to 32 tracks can be programmed.
1
Whilst in the stop mode, press
the MEMORY/SET (MEMORY)
button to enter the programming
save mode.
2
Press one of the s 1 - s 6 buttons
to select the desired disc.
3
Press the 3 / 5 5 or 2 2 / 4
button to select the desired track.
Selected disc number
Selected Playback
track number order
4
Press the MEMORY/SET (MEMORY)
button to save the track number.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
6
Press the ■ (CD ■ ) button.
7
0 0/R ( / 0 R) button to start playback. R
Press the
Note:
During programme play, buttons s 1 - s 6 will not work.
To clear the programmed selections:
Press the CLEAR button whilst the "MEMORY"
indicator is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
To cancel the programmed play mode:
Whilst in the stop mode, press the CLEAR button. The "MEMORY" indicator will disap-
pear and all the programmed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed.
Then follow steps 1 - 6 to add tracks. The new tracks will be stored after the last track
of the original programme.
To check which tracks are programmed:
Whilst the unit is stopped in the programmed play mode, press the 3 / 5 or 2 / 4
button.
Notes:
●
Opening any tray of the programmed discs automatically cancels the programmed
sequence.
●
Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another function, the programmed selections will not be cleared.
●
During programme operation, random play is not possible.
ENGLISH E-16