Programmed Play - Sharp CD-BA250 Mode D'emploi

Programmed Play

By specifying discs from 1 to 3 and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons on
the remote control to select the
desired disc.
2
Press the
PRESET
lect the desired track.
You can also select a track by pressing the
remote control.
3
Press the MEMORY/SET (MEM-
ORY) button to save the track
number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5
Press the
To clear the programmed selections:
Whilst in the stop mode, press the CLEAR but-
ton on the remote control.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add additional tracks. The new tracks will be stored
after the last track of the original programme.
Selected disc number
Notes:
z Opening the disc tray automatically cancels the programmed sequence.
z Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
z During programme operation, random play is not possible.
PRESET or
button to se-
Selected track number
/ or
Playback order
/ ( ) button to start playback.
/ button on the
ENGLISH E-16