In Case Of Faults - Medion MD 2867 Mode D'emploi

I
N CASE OF FAULTS
Your unit is constructed and manufactured so that
it should have a long service life without any
malfunction. If a fault should occur during
operation, please contact your nearest customer
service centre. However, check beforehand
whether the fault is due to an operating error,
because in this case you will be charged for any
customer service costs, even during the warranty
period. You may be able to eliminate the following
faults by checking for possible causes:
The unit does not function
• Power failure
• The main fuse has blown
• The thermostat is set to " 0 "
• The fuse on the power socket is faulty. Check
this by connecting another appliance to the
same power socket.
The temperature in the freezing compartment is
not low enough
• The unit is overloaded
• The doors do not shut properly
• Dust on the condenser
• Air cannot circulate correctly.
• The unit is standing too close to a wall or
another object.
GB
GB-27