Changing The Door Mounting - Medion MD 2867 Mode D'emploi

C
HANGING THE DOOR MOUNTING
Depending on where you locate your refrigerator, it
may be necessary to change the door mounting
from left to right. You can do this yourself or you
can contact your customer service centre (who will
charge this). If you do decide to do it yourself, have
a cross-head and a flat-tip screwdriver at hand and
then follow the instructions given below:
Step 1
Loosen and remove the two screws on the middle
hinge with a cross-head screwdriver. Carefully
remove the two big caps and the small cap on the
left side by levering them carefully out with a flat
object. This is where the hinge will be attached later
on.
20 REFRIGERATOR/FREEZER COMBINATION MD 2867