System Lay-Out; Technical Characteristics - RIB NORMAL Mode D'emploi

G

SYSTEM LAY-OUT

B
NORMAL barrier
- Photoelectric cells
- Galvanized column for P.E. cells
- Fotocosta
- Magnetic loop
- Key selector
- Tuned aerial
- Emergency button

TECHNICAL CHARACTERISTICS

Lh./rh.irreversible gearmotor used for raising and lowering barrier poles up to 6-7 m long.
The upright can be supplied in a painted galvanized version.
The barrier boom can be supplied as one unjointed length or, where headroom is restricted, it can
be requested in an articulated version if you specify the height of the obstruction above road level.
Besides it can be supplied in one piece with hanging rack.
The barrier boom is designed to be fitted with a pneumatic or photocell safety strip.
ATTENTION: It is compulsory to conform the barrier characteristics to the current regulations and
laws.
THIS OPERATOR IS DESIGNED FOR THE VEHICLES ACCESS CONTROL AND NOT FOR
PEDESTRIANS.
Therefore, we higly recommend the use of safety devices and that of one or
more warning plates, art. ACG9642 to prevent the pedestrians interfering with
the operator.
181,10"
118,11"
2755,90"
Measurements in mm/inch
TECHNICAL DATA
Max. boom lenght
Opening time
Max. torque
EEC Power supply
Motor capacity
Power absorbed
Capacitor
Power supply
Motor capacity
Power absorbed
Capacitor
Normative cycles 230V
Normative cycles 120V
Daily operations suggested
Service
Guaranteed consecutive cycles
Lubrification
Weight of electroreducer
Noise
Working Temperature
Protection grade
30
NORMAL
6-7
m
s 11
Nm 300
230V~ 50Hz
130
W
A 0,6
µF 6,3
120V~ 60Hz
W 168
A 1,46
µF 20
n° 1000 - 11s/2s
∞ - 11,5s/2s
n°
n° 1000
100%
n° 1000
SHELL OMALA S2 G100
kg 145
<70
db
-10 ÷ +55°C
55
IP