Proper Use; Technical Data - EINHELL GC-MM 52 I AS Mode D'emploi

•
Hexagon key 3 mm
•
Hexagon key 4 mm
•
Hexagon key 5 mm
•
Open-ended wrench size 8/10
•
Cutter guard
•
Safety goggles
•
Original operating instructions

3. Proper use

The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds
and undergrowth. The power trimmer (using the
line spool with cutting line) is designed for cutting
lawns, grassed areas and small weeds. The ope-
rating instructions as supplied by the manufactu-
rer must be obeyed to ensure that the equipment
is used properly. Any use which is not expressly
permitted in these instructions may result in da-
mage to the equipment and place the user in seri-
ous danger. Be sure to observe the restrictions in
the safety information.
The pole-mounted petrol-powered pruner is
designed for lopping off tree branches. It is not
suitable for extensive sawing work, felling trees or
sawing any materials other than wood.
This hedge trimmer is suitable for cutting hedges,
bushes and shrubs.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Danger! Due to the high risk of bodily injury to
the user, the petrol power scythe is not allowed
to be used to clean paths or to chop up tree and
hedge clippings. Similarly, the petrol power scythe
must not be used to level out high areas such as
molehills. For safety reasons, the petrol power
scythe must not be used as a drive unit for other
work tools or toolkits of any kind.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Anl_GC_MM_52_I_AS_SPK9.indb 37 Anl_GC_MM_52_I_AS_SPK9.indb 37
GB

4. Technical data

Engine unit:
Engine
type . 2-stroke engine, air-cooled, chrome cylinder
Engine power (max.) ...................1.5 KW / (2 HP)
Displacement ........................................ 51.7 cm
Engine idling speed .................3000 +- 300 min
Max. engine speed...............................9600 min
Ignition .................................................Electronic
Drive ........................................Centrifugal clutch
Weight (empty tank without accessories) ......4 kg
Petrol tank capacity .......................900 cm3 (0.9 l)
Spark plug ............................................... L8RTC
Scythe:
Weight (empty tank) ....................................6.8 kg
Max. scythe speed ...............................7200 min
Engine speed ......................................9600 min
Cutting circle Ø of blade .......................... 255 mm
Blade type: ..................... iSC Art. No.: 34.052.30
Trimmer:
Weight (empty tank) ....................................6.8 kg
Max. trimmer speed .............................7000 min
Engine speed ......................................9300 min
Cutting circle Ø ....................................... 420 mm
Line diameter .......................................... 2.4 mm
Line spool type: ............... iSC Art. No.: 34.050.86
High hedge trimmer:
Weight (empty tank) ..................................8.34 kg
Engine speed ......................................9600 min
Cuts per minute .......................................... 1527
Cutting length ......................................... 395 mm
Cutter rail length ...................................... 430 mm
Tooth spacing ........................................... 31 mm
Max. cutting thickness .............................. 25 mm
Pole-mounted pruner:
Weight (empty tank) ..................................7.85 kg
Engine speed ......................................9600 min
Cutting length ......................................... 255 mm
Max. cutting speed .................................21.3 m/s
Oil tank capacity ........................150 cm
Chain ....................................... Oregon 91P040X
Cutter rail .......................... Oregon 100SDEA318
- 37 -
3
-1
-1
-1
-1
-1
-1
-1
-1
(150 ml)
3
15.03.2019 07:39:35 15.03.2019 07:39:35