Safety Regulations; Layout And Items Supplied; Proper Use - EINHELL TE-MG 12/1 Li Instructions D'origine

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

The corresponding safety information can be
found in the enclosed booklet.
Warning!
Read all the safety information, instructions,
illustrations and technical data provided on
or with this power tool. Failure to adhere to the
following instructions may result in electric shock,
fire and/or serious injury.
Keep all the safety information and instruc-
tions in a safe place for future use.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. On/Off switch
2. Tool chuck
3. Charger
4. Speed controller
5. Quick-release lock for changing tools
6. Rechargeable battery
7. Pushlock button
2.2 Items supplied
Please check that the article is complete as
specified in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
Anl_TE_MG_12_1_Li_SPK9.indb 17 Anl_TE_MG_12_1_Li_SPK9.indb 17
GB
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suffocating!
•
Multi-tool
•
Triangular grinding/sanding plate
•
6x abrasive paper
•
Scraper
•
Plunge-cut saw blade for wood
•
Segmented saw blade for metal
•
Rechargeable battery
•
Charger
•
Original Operating Instructions
•
Safety information

3. Proper use

The equipment is suitable for sanding/grinding
small areas. For sanding/grinding larger areas the
vacuum extractor, which is available as an acces-
sory (see 7.3), must be used.
The equipment is designed for the sanding/grin-
ding of wood, iron, plastic and similar materials
using the appropriate abrasive paper. Furthermo-
re, the equipment is intended for sawing wood,
plastic and similar materials, as well as scraping
off glued carpets, filling compound residues, old
paint and similar applications.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
- 17 -
27.04.2021 09:48:55 27.04.2021 09:48:55