Cps (Computer Programming Software) - Motorola CP110 Série Guide De L'utilisateur

To delete a channel from the Scan List:
• Start Scan by short pressing the SB2 button (*)
• Wait until the radio stops on the channel you wish
to eliminate, then long press the SB2 button to
delete it.
• The channel will not be removed until you exit
Scan by short pressing the SB2 button again or
by turning the radio OFF.
Note: (*) Assumes the SB2 button is not
programmed to another function different
from the default.
CPS (COMPUTER PROGRAMMING
SOFTWARE)
Radio to be
programmed
USB
Connector
Drop-in
Charger
Programming
Mini
Tray
Connector
The easiest way to program or change features
in your radio is by using the Computer
Programming Software (CPS) and the CPS
Programming Cable (*).
To program, connect the CP110™ Series radio
via the Drop-in Charger Tray and CPS
Programming Cable as shown in the picture
above.
CPS
Cable
43
English