Packing List - Ego Power+ HT5100E Manuel De L'opérateur

◾
The trimmer shall be used to cut stems less than
(33mm) thick.
◾
Trim only in daylight or in good artificial light.
◾
Remove or disconnect battery before servicing,
cleaning, or removing material from the hedge trimmer.
◾
Do not wash with a hose; avoid getting water in motor
and electrical connections.
◾
When servicing use only identical replacement parts
listed in this manual. Use of parts which do not meet
the original equipment specifications may lead to
improper performance and compromised safety.
◾
Follow instructions for lubricating and changing
accessories.
◾
Keep handles dry, clean and free from oil and grease.
◾
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Model HT5100E
Voltage
56 V
High 1600 /min
No-Load Speed
Low 1400 /min
Recommended
Operating
Temperature:
Recommended
Storage
Temperature:
Blade Length 51 cm
Cutting Capacity 33 mm
Weight (without battery pack) 3.6 kg
Measured sound power 90 dB(A)
level L K=1.55 dB(A)
WA
Sound pressure level at
operator's position L 81.5 dB(A)
PA
K=2.5 dB(A)
Guaranteed sound power level
92 dB(A)
L (according to 2000/14/EC)
WA
Front Handle 3.369 m/s
Vibration a
h
K=1.5 m/s
2
Rear Handle 1.876 m/s
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT5100E / HT6500E
◾
◾
NOTICE:
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.

PACKING LIST

PART NAME
Hedge Trimmer
Shield
Operator's manual
DESCRIPTION
KNOW YOUR HEDGE TRIMMER (Fig. A)
1. Battery-release Button
2. Rear Handle
HT6500E
3. Lock-off Trigger
56 V
4. Rear Switch Lever
1600 /min
5. Speed Adjustment Knob
1400 /min
6. Front Handle
7. Front Switch Lever
0°C-40°C
8. Hand Guard
9. Blade Guard
-20°C-70°C
10. Blade
11. Tip Protector
65 cm
12. Latch
33 mm
13. Electric Contacts
3,8 kg
14. Mounting Slot
91.45 dB(A)
15. Ejection Mechanism
K=1.08
dB(A)
16. Lock for Handle
17. Motor Housing
81.4 dB(A)
18. Shield
93 dB(A)
completely assembled. The hand guard shall never
be removed during use. Once damaged, replace it
5.313 m/s
2 2
immediately by a qualified service technician.
3.115 m/s
2 2
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
The declared vibration total value may also be used in
a preliminary assessment of exposure.
The vibration emission during actual use of the
WARNING: This product has been shipped
EN
QUANTITY
1
1
1
7