Packing List - Ego Power+ STA1500 Manuel De L'opérateur

Masquer les pouces Voir aussi pour STA1500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24

PACKING LIST

PART NAME
Line Trimmer Attachment
Guard
Hex Wrench
Multi-Function Wrench
Operator's Manual
About recommended cutting line, please visit the website
egopowerplus.com or refer to the EGO Product Catalogue.
DESCRIPTION
KNOW YOUR LINE TRIMMER ATTACHMENT (Fig. A)
1. End Cap
2. Line trimmer Shaft
3. Cutting Line
4. Trimmer Head (Bump Head)
5. Release Tab
6. Line-cutting Blade
7. Guard
8. Hex Wrench
9. Multi-Function Wrench
WARNING:
Never operate the tool without the guard
firmly in place. The guard must always be on the tool to
protect the user.
ASSEMBLY
WARNING:
If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product
or create accessories not recommended for use with this
line trimmer. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possibly serious personal injury.
WARNING:
Do not connect to power head until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
MOUNTING THE GUARD
WARNING:
Always wear gloves when mounting or
replacing the guard. Be careful of the blade on the guard
and protect your hands from being injured by the blade.
Loosen and remove the two screws from the guard (Fig. C),
QUANTITY
align the guard mounting holes with the assembly holes
1
and then lock the guard onto the shaft base with the two
screws, together with two spring washers (Fig. D).
1
Make sure the guard is fixed according to Fig. C & D, any
1
reverse fixing will cause great danger!
1
CONNECTING THE LINE TRIMMER ATTACHMENT TO
THE POWER HEAD
1
This line trimmer attachment is designed for use with EGO
Power Head PH1400E.
See " INSTALLING AN ATTACHMENT TO THE POWER HEAD
" section in the power head PH1400E operator's manual.
OPERATION
WARNING:
to make you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING:
hearing protection. Failure to do so could result in objects
being thrown into your eyes and other possible serious
injuries.
APPLICATIONS
You may use this product for the purpose listed below:
Trimming grass and weeds from around porches,
fences, and decks
NOTICE:
The tool is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
Before each use check for damaged/worn parts
Check the trimmer head, guard and front-assist handle
and replace any parts that are cracked, warped, bent, or
damaged in any away.
The line-cutting blade on the edge of the guard can
dull over time. It is recommended that you periodically
sharpen it with a file or replace it with a new blade.
WARNING:
replacing the guard or when sharpening or replacing the
blade. Note the location of the blade on the guard and
protect your hand from injury.
WARNING:
remove the battery pack from the power head before
servicing, cleaning, changing attachments or removing
material from the unit.
LINE TRIMMER ATTACHMENT — STA1500
Do not allow familiarity with this product
Always wear eye protection, along with
Always wear gloves when mounting or
To prevent serious personal injury,
EN
9

Publicité

Table des Matières
loading

Table des Matières