Titan ED655 Mode D'emploi page 2

Original Operating Manual
Attention: Danger of injury by injection!
Airless units develop extremely high spraying pressures.
Never put your ingers, hands or any other parts of the body into
1
the spray jet!
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without safety guard.
Do not treat a spraying injury as a harmless cut. In case of injury
to the skin through coating materials or solvents, consult a doctor
immediately for quick and expert treatment. Inform the doctor
about the coating material or solvent used.
The operating instructions state that the following points must
2
always be observed before starting up:
1. Faulty units must not be used.
2. Secure Titan spray gun using the safety catch on the trigger.
3. Ensure that the unit is properly earthed.
4. Check allowable operating pressure of high-pressure hose and spray
5. Check all connections for leaks.
The instructions regarding regular cleaning and maintenance of
3
the unit must be strictly observed.
Before any work is done on the unit or for every break in work the
following rules must be observed:
1. Release the pressure from spray gun and hose.
2. Secure the Titan spray gun using the safety catch on the trigger.
3. Switch of unit.
Be safety conscious!
Warning!
gun.
GB
2 ED655