LawnMaster CS1216 Manuel D'utilisation page 36

MAINTENANCE
Turn the locking wheel (9) to tighten the side >>cover (10) completely (Fig. 40).
Do not overfill. Leave approximately 5 mm of space to the lower edge to allow the lubricant to
expand (Fig. 41).
Check the oil level at the window of the oil tank (11) prior to switching on and regularly during
operation. Refill oil when the oil level is lower than the "MIN" marking (Fig. 42).
Wipe up spilled lubricant with a soft cloth and refit the tank cap (11a).
ake sure the guide bar (6) and the saw chain (5) are in place when you check the oil delivery.
Switch on the product (see section "on/off switch" below); keep pressing the on/off switch (13) and
check if the chain oil is delivered as shown in the figure (Fig. 43)
9
Fig. 41
Fig. 43
36
Fig. 40
11a
Fig. 42
11