Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
WARNING
Keep all parts of the body away from the saw chain when the chain saw is
operating. Before you start the chain saw, make sure the saw chain is not
contacting anything. A moment of inattention while operating chain saws may cause
entanglement of your clothing or body with the saw chain.
WARNING
Always hold the chain saw with your right hand on the rear handle and your
left hand on the front handle. Holding the chain saw with a reversed hand configuration
increases the risk of personal injury and should never be done.
WARNING
Always use a saw chain designed as "low-kickback" or a saw chain which meets the low-kickback
requirements! A standard saw chain (a chain which does not have the kickback reducing guard links)
should only be used by an experienced professional operator!
Nevertheless, a low-kickback saw chain does not completely eliminated kickback! A low-kickback
or "safety" chain should never be regarded as complete protection against injury!
Therefore always use a low-kickback saw chain in conjunction with other kickback protection
devices such as the front hand guard!
Use only the guide bar (6) and saw chain (5) according to the technical data of the product.
Place the product on a suitable flat surface.
Loosen the locking wheel (9) and remove the side cover (10) (Fig. 24).
Spread the saw chain (5) out with the cutting edges of the chain pointing in the rotational direction
10
9
Fig.24
31
5
6
Fig.25
Publicité
Table des Matières
