LawnMaster CS1216 Manuel D'utilisation page 16

OPERATION
QUICK VIEW
OIL INDICATOR
CONNECTING TO POWER SUPPLY (See Fig. 7)
This chainsaw is designed with a cord retainer that prevents the extension cord from being pulled
loose while using.
Form a loop with the end of the extension cord.
Insert loop portion of extension cord through the opening in the side of the rear handle,
and place over cord hitch.
Slowly pull loop against cord retainer until the slack is removed.
Plug chainsaw into extension cord.
NOTE: Failure to remove all excess cord slack from extension cord retainer could result in plug loosening
from receptacle.
STARTING AND STOPPING THE CHAINSAW (See Fig. 8)
W A R N I N G
Keep body to the left of the chain line. Never straddle the saw or chain, or lean over past the
chain line.
Fig. 6
OIL
RESERVOIR
CAP
16
Fig. 7
EXTENSION
CORD