MAINTENANCE
Ensure the tension disc (6b) is adjusted to outer right position, turn anticlockwise if required (Figs. 29-30).
Fig. 29
Fig. 30
Align the guide bar (6) and saw chain (5) assembly with the drive sprocket (19) and support bolt (17).
Lay the saw chain around the drive sprocket and then lower the guide bar to install it to the support
bolt (Figs. 31-32).
Fig. 31
Fig. 32
Replace the side cover (10) and slightly tighten the locking wheel (9) (Fig. 33).
Do not tighten the locking wheel completely; saw chain tensioning is required first.
10
9
Fig. 33
33