Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
REPLACING THE GUIDE BAR AND CHAIN (See Fig. 24 - 32.)
D A N G E R
Never start the motor before installing the guide bar, chain, chain cover, and chain cover lock knob.
serious injury.
W A R N I N G
To avoid serious personal injury, read and understand all the safety instructions in this section.
W A R N I N G
Before performing any maintenance, make sure the tool is unplugged from the power supply.
Failure to heed this warning could result in serious personal injury.
C A U T I O N
Always wear gloves when handling the bar and chain. These components are sharp and may
contain burrs.
W A R N I N G
Never touch or adjust the chain while the motor is running. The saw chain is very sharp. Always
wear protective gloves when performing maintenance involving the chain to avoid possible serious
lacerations.
Chain Combinations section later in this manual.
30
Bar and
Publicité
Table des Matières
