Assembly And Installation - Yamaha YZ250/LC Manuel Du Propriétaire

Table des Matières

REMOVAL POINTS

Master cylinder

Master cylinder bracket 1

Master cylinder 2

Do not let the master cylinder hang on the

Keep the master cylinder cap side horizon-

tal to prevent air from coming in.

Blow in air between the handlebar or tube guide

and the grip. Then remove the grip which has

become loose.

Bends/Cracks

Do not attempt to straighten a bent handlebar

as this may dangerously weaken the handlebar.

ASSEMBLY AND INSTALLATION

Throttle assembly

Grip (right) 1

Apply the adhesive on the tube guide 2.

Before applying the adhesive, wipe off grease

or oil on the tube guide surface a with a lac-

quer thinner.

Align the mating mark b on the grip (right)

with the slot c in the tube guide.

/Damage¡Replace.