Table des Matières
Publicité
å å
CRANKCASE AND CRANKSHAFT
B
EC4N5102
Oil seal
1. Install:
9
Oil seal (left) 1
9
Oil seal (right) 2
NOTE:
9
Apply the lithium soap base grease on the oil
seal lip.
9
Install the oil seal with its manufacture's marks
or numbers facing outward.
EC4N5282
Crankshaft
1. Install:
9
Crankshaft 1
Use the crankshaft installing tool 2, 3, 4.
Crankshaft installing tool:
Pot 2:
Bolt 3:
Adapter 4: YM-1277/90890-01277
å For USA and CDN
∫ Except for USA and CDN
NOTE:
9
Hold the connecting rod at top dead center
with one hand while turning the nut of the
installing tool with the other. Operate the
installing tool until the crankshaft bottoms
against the bearing.
9
Before installing the crankshaft, clean the con-
tacting surface of crankcase.
9
Apply the lithium soap base grease on the oil
seal lip.
cC
Do not use a hammer to drive in the crank-
shaft.
2. Check:
9
Shifter operation
9
Transmission operation
Unsmooth operation ¡ Repair.
4-69
ENG
YU-90050/90890-01274
YU-90050/90890-01275
Publicité
Table des Matières
