Yamaha YZ250/LC Manuel Du Propriétaire page 440

FRONT FORK
26. Tighten:
9
Cap bolt (locknut) 1
NOTE:
9
While compressing the fork spring, set the thin
type spanners 2 between the spacer 3 and
spring guide 4.
9
Hold the locknut 5 and tighten the cap bolt
with specified torque.
27. Install:
9
Cap bolt 1
To outer tube.
NOTE:
Temporarily tighten the cap bolt.
28. Install:
9
Protector guide 1
EC5552A1
Installation
1. Install:
9
Front fork 1
NOTE:
9
Temporarily tighten the pinch bolts (under
bracket).
9
Do not tighten the pinch bolts (handle crown)
yet.
2. Tighten:
9
Cap bolt 1
3. Adjust:
9
Front fork top end a
Front fork top end (standard) a a :
Zero mm (Zero in)
5-38
CHAS
29 Nm (2.9 m•kg, 21 ft•lb)
30 Nm (3.0 m•kg, 22 ft•lb)