Table des Matières
Publicité
1 Hose guide
2 Master cylinder
3 Brake hose holder
4 Brake hose
CABLE ROUTING DIAGRAM
A Pass the reservoir hose between the brake
hose and swingarm bracket.
B Install the brake hose to the caliper with the
paint on the pipe facing the caliper and with
the pipe contacting the caliper projection.
C Pass the brake hose into the brake hose
holders.
D If the brake hose contacts the spring (rear
shock absorber), correct its twist.
E Install the brake hose so that its pipe portion
directs as shown and lightly touches the
projection on the master cylinder.
2-16
SPEC
Publicité
Table des Matières
