Yamaha YZ250/LC Manuel Du Propriétaire page 380

FRONT WHEEL AND REAR WHEEL
3. Install:
9
Driven sprocket 1
9
Bolt (driven sprocket) 2
9
Plain washer (driven sprocket) 3
9
Nut (driven sprocket) 4
NOTE:
Tighten the nuts in stage, using a crisscross pat-
tern.
4. Install:
9
Collar 1
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
5. Install:
9
Wheel
NOTE:
Install the brake disc 1 between the brake pads
2 correctly.
6. Install:
9
Drive chain 1
NOTE:
Push the wheel 2 forward and install the drive
chain.
7. Install:
9
Chain puller (left) 1
9
Wheel axle 2
NOTE:
9
Install the chain puller (left), and insert the
wheel axle from left side.
9
Apply the lithium soap base grease on the
wheel axle.
5-8
CHAS
42 Nm (4.2 m•kg, 30 ft•lb)