Yamaha YZ250/LC Manuel Du Propriétaire page 304

KICK AXLE, SHIFT SHAFT AND PRIMARY DRIVE GEAR
3. Install:
9
Spring guide 1
NOTE:
Slide the spring guide into the kick axle, make
sure the groove a in the spring guide fits on the
stopper of the torsion spring.
4. Install:
9
Plain washer 1
9
Kick axle assembly 2
NOTE:
9
Apply the molybdenum disulfide oil on the con-
tacting surfaces of the kick axle stopper a and
stopper plate 3.
9
Apply the transmission oil on the kick axle.
9
Slide the kick axle assembly into the
crankcase and make sure the kick axle stopper
fits into the stopper plate.
5. Hook:
9
Torsion spring 1
NOTE:
Turn the torsion spring clockwise and hook into
the proper hole a in the crankcase.
EC4C5420
Kick idle gear
1. Install:
9
Kick idle gear 1
9
Plain washer 2
9
Circlip 3
NOTE:
9
Apply the transmission oil on the kick idle gear
inner circumference.
9
Install the kick idle gear with its depressed side
a toward you.
4-46
ENG