Commissioning; Maintenance; Product Disposal - Nice MhouseKit GD1N Instructions Et Avertissements Pour L'installation Et L'utilisation

3.7.2 – Commissioning
The commissioning operations can be performed only after all the
tests have been successfully carried out. Partial commissioning
or implementation of "temporary" conditions are not permitted.
1 Prepare the technical documentation for the automation, which must
include at least: assembly drawing (e.g. figure 1), wiring diagram (e.g. fig-
ure 65), analysis of hazards and solutions adopted, manufacturer's decla-
ration of conformity of all the devices installed. For GD use Annex 1 "CE
Declaration of Conformity of the GD components".
2 Post a label on the door providing at least the following data: type of
automation, name and address of manufacturer (person responsible for the
"commissioning"), serial number, year of manufacture and "CE" marking.
3 Fill out the declaration of conformity and deliver it to the owner of the
automation system; for this purpose you can use Annex 2 "CE Declara-
tion of Conformity".
4 Prepare the operating guide and deliver it to the owner of the automa-
tion system; Annex 3 "OPERATING GUIDE" can be used as an example.
5 Prepare the maintenance schedule and deliver it to the owner of the
automation system; it must provide directions regarding the maintenance
of all the automation devices.
6 Post a permanent label or sign detailing the operations for the release
and manual manoeuvre (use the figures in Annex 3 "Operating guide").
7 Before commissioning the automation system, inform the owner regard-
ing dangers and hazards that are still existing.
8 Post a permanent label or sign with this image on the door (minimum
height 60 mm) with inscription WARNING – RISK OF CRUSHING.
STEP 4
The maintenance operations must be performed in strict com-
pliance with the safety directions provided in this manual and
according to the applicable legislation and standards.
The devices used for the GD automation system do not require any spe-
cial maintenance. However, periodically make sure (at least once every six
months) that all the devices are perfectly efficient.
This product is an integral part of the automation system it con-
trols and must be disposed of along with it.
As in installation operations, at the end of the product's lifespan, disposal
operations must be performed by qualified personnel.
The product is made of various types of materials: some of them may be
recycled, while others must be scrapped. Seek information on the recy-
cling and disposal methods envisaged by the local regulations in your
area for this product category.
Warning! – Some parts of the product may contain polluting or hazard-
ous substances which, if released to the environment, may cause serious
damage to the environment or to human health.
As indicated by the symbol alongside, disposal of this
product with household waste is prohibited. Separate the
waste into categories for disposal, according to the meth-
ods established by current legislation in your area, or return
the product to the retailer when purchasing a new version.
Warning! – Local legislation may impose heavy fines in
the event of illegal disposal of this product.
20 – English
79

MAINTENANCE

To this end, carry out all the tests and checks described in paragraph
3.7.1 "Testing" and the operations described in paragraph 7.3.3 "Mainte-
nance operations to be performed by the user".
If other devices are present, follow the directions provided in the corre-
sponding maintenance schedule.

PRODUCT DISPOSAL

Disposal of buffer battery (if present)
Warning! – Even if discharged, the batteries may contain pollutant sub-
stances and therefore must never be disposed of in normal waste collec-
tion points.
Dispose of according to separate waste collection methods as envisaged
by current local standards.