INVENTOR R2-ION8L Manuel D'utilisateur page 10

7. CONTROL PANEL • FUNCTIONS
POWER
Press "Power" button to turn the dehumidifier on or off.
• After turning the dehumidifier OFF, the fan continues to operate for a small
period of time, so as to protect the inner components. During this operation
DO NOT unplug the device. Please wait for the fan to stop operating.
• In the event of a power failure the unit has an Auto Restart function. Once
the power is restored after a power failure, the appliance will automatically
restart to operate at the selected settings prior to the power failure.
FAN
While operating press the "FAN" button to select the fan speed. Low, Medium or High
fan speeds are available. The corresponding led indicator will activate, confirming your
selection.
• The use of LOW speed is recommended for lower noise levels or for ar-
eas with less condensation.
• The use of HIGH speed should be preferred to achieve faster dehumi-
dification.
MODE
Press "MODE" button, and select among the following operations:
Turbo Mode (continuous dehumidification): The dehumidifier will operate continu-
ously, extracting humidity from the air. When this function is selected, the dehumidifi-
er will keep running continuously until the water tank is full, disregarding the relative
humidity of the room.
10
EN