Disposal - Wilo VeroLine-IPL Notice De Montage Et De Mise En Service

Spare parts table
12

Disposal

Installation and operating instructions Wilo-IPL/DPL (1.1-7.5 kW)
Deliverable spare parts (see also fig. 1/2):
No. Part
1 Exchange set (complete
with motor):
1.1 Impeller kit with
1.11
1.12
1.13
1.14
1.2 Mechanical seal kit with
1.11
1.12
1.14
1.21
2 Motor exchange set (when
replacing the motor, kit 1.2
must also be ordered):
2.1
3 Pump housing complete
with:
1.14
3.1
3.2
3.3
3.4
4 Fastening screw for motor
flange/pump housing (also
in motor exchange set)
Proper disposal and recycling of this product prevents damage to the
environment and risks to personal health.
Disposal in accordance with the regulations requires the product to be
drained and cleaned.
Lubricants must be collected. The pump components are to be sepa-
rated according to material (metal, plastic, electronics).
1. Use public or private disposal organisations when disposing of all
or part of the product.
2. For more information on proper disposal, please contact your local
council or waste disposal office or the supplier from whom you
obtained the product.
Subject to change without prior notice!
Details
Nut
Washer
Impeller
O-ring
Nut
Washer
O-ring
Mechanical seal (complete)
Vent screw
O-ring
Pump housing (IPL, DPL)
Stopper for pressure measurement connec-
tions
Switchover valve ≤ DN 80 (only DPL pumps)
Switchover valve ≥ DN 100 (only DPL
pumps)
English
39