TAKATA MINI I-SIZE Manuel D'utilisation page 71

WARNING!
>$LUEDJ :DUQLQJ@ 1(9(5 ¿W WKH 7$.$7$ 0,1, ,6,=(
in a backward-facing position on the front seat with
the airbag activated. There is a SERIOUS RISK OF
INJURY OR DEATH, and it is therefore FORBIDDEN
BY LAW.
Depending on the vehicle, you may be able to deactivate
the airbag yourself, or may need to contact your local
dealer/garage for assistance.
Step 2 – Lock the seat into the TAKATA I-SIZE BASE
[MINI_I-SIZE_048] Turn the TAKATA MINI I-SIZE
against the direction of travel, and place it above the
middle of the TAKATA I-SIZE BASE. The edge of the
TAKATA MINI I-SIZE with the belt loosening lever
must be positioned in a central position between the
rear connection arms and the seat backrest contact
surface of the TAKATA I-SIZE BASE. Press the two
connection bolts of the TAKATA MINI I-SIZE into
the rear connection hooks of the TAKATA I-SIZE
BASE. The bolts are properly locked into the rear
connection hooks of the TAKATA I-SIZE BASE when
each clicks into place, and you can see a green
marking on the top of each hook's release element.
[MINI_I-SIZE_049] To secure the connection arms of
the TAKATA MINI I-SIZE with the front connection
hooks of the TAKATA I-SIZE BASE, press down
from above on the back section of the TAKATA MINI
I-SIZE, until you hear a click.
WARNING!
[MINI_I-SIZE_047] Do not use the TAKATA MINI
I-SIZE if it is not correctly secured to the TAKATA
I-SIZE BASE. It is properly locked in place when you
can see a green marking on the top of each rear hook's
release element and if you checked prior to installation
of the TAKATA MINI I-SIZE on the TAKATA I-SIZE
BASE that the rear connection hooks were open.
de
en
fr
it
es
nl
67