TAKATA MINI I-SIZE Manuel D'utilisation page 60

Step 2 – Adjust and fasten the inner padding
Keep the slider pressed down, and at the same time,
slide the inner padding up or down, to adjust this and
the shoulder straps to the size of your child. Then
release the slider again. The slider is locked in place
when it clicks into the slots on either side.
CAUTION!
Whenever you adjust the seat, check that the slider
is locked into position again. To do this, gently try to
move the slider up or down, without pushing it in.
It may be necessary to adjust the inner padding further,
according to your child's size. For further information
on this, please see Section 4 – Securing your child.
The TAKATA MINI I-SIZE is equipped with an
additional newborn inlay. You can use this cushion
GXULQJ WKH ¿UVW PRQWKV ZKHQ \RXU EDE\ LV VWLOO VPDOO WR
56
ensure side protection especially in the head area of
your child. Whether you need this newborn inlay or
not, and for how long you should use it, always depends
on the stature of your child.
Loosening the straps and opening the buckle
Before placing your child in the TAKATA MINI I-SIZE
or removing your child from it, loosen the straps and
open the buckle. The TAKATA MINI I-SIZE features
a central lever that is used to loosen the straps.
Step 1 – Unblock the straps
[MINI_I-SIZE_024] To loosen the straps, pull the lever
up and hold it in this position.
Step 2 – Loosen straps
At the same time, pull the shoulder straps gently forward
as far as possible.