Installation And Connection; Installation Instruction; Electrical Connection - Beko MGB 20212 B Manuel De L'utilisateur

3 Installation and connection

3.1 Installation Instruction

• Please observe the special installation instruc-
tions.
• The appliance can be installed in a 60cm wide
wallmounted cupboard.
• The appliance is fitted with a plug and must only
be connected to a properly installed earthed
socket.
• The mains voltage must correspond to the volt-
age specified on the rating plate.
• The socket must be installed and connect-
ing cable must only be replaced by a qualified
electrician. If the plug is no longer to accessible
following installation, an all-pole disconnecting
device must be present on the installation side
with a contact gap of at least 3mm.
WARNING: Adapters, multi-way
strips and extension leads must not
be used. Overloading can result in a
risk of fire.

3.2 Electrical connection

• The appliance is fitted with a plug and must only
be connected to a properly installed earthed
socket.
• Only a qualified electrician who takes the appro-
priate regulations into account may install the
socket or replace the connecting cable.
• If the plug is no longer accessible following in-
stallation, an all-pole isolating switch must be
present on the installation side with a contact
gap of at least 3 mm.
• Contact protection must be ensured by the in-
stallation.
12 / EN Microwave Oven / User Manual