Manual Tuning - Sony ICF-SW07 Mode D'emploi

Various ways of reception (continued)

Manual tuning

Use – 1¿ ,÷1 + or ¿ ,÷ to change the frequency manually step by step.
The outer buttons ( – 1¿ and ÷1 + ) change the frequency in large
frequency steps, and the inner buttons (¿ and ÷) in small frequency
steps.
FM/AM
AM BAND
1
Press POWER ON/OFF to turn on the radio.
2
Press FM/AM to select either band.
To listen to SW, MW or LW broadcasts, select AM.
3
For the AM bands, hold down AM BAND and press
– 1¿ or ÷1 + to select MW (medium wave), LW (long
wave) or a meter band (short
wave).
The name of the band or the meter
band and its lowest frequency appears
in the display.
For FM, skip this step.
4
Press – 1¿, ÷1 + or ¿, ÷ repeatedly to tune in to the
desired broadcast station.
With each press, the frequency changes in the channel steps shown
below. (The figures in the parentheses indicate the steps in the SSB
mode).
Band
FM
SW
MW
LW
* The frequency step is adjusted automatically to your time zone
according to your local time zone setting (see "Automatic
adjustment of the MW channel step", page 15).
** Units of 0.1 kHz are not indicated in the display.
GB
18
Listening to the radio
ABC DEF GHI
1 2
FM/
AM
JKL MNO PQR
4 5
AM BAND
STU VWX YZ
LOCAL/
7 8
WORLD
<>
/ DISPLAY
LABEL EDIT
0 EXE
DIRECT
TIMERSTANDBY/ TIME SET
STANDBY TIME SET TIME DIFF
a b
STANDBY MEMORY
SW STATION CALL
MY DW VOA
– 1¿ or ÷1 +
0.05 MHz
5 kHz (1 kHz)
9 or 10 kHz* (1 kHz)
9 kHz (1 kHz)
POWER
ON/
3
SYNC
OFF
6
SSB SLEEP
DST
9
ERASE
LIGHT
TIME SET
ENTER
JOG/
TUNE/
SCAN˚
BBC OTH
¿ or ÷
0.05 MHz
1 kHz (0.1 kHz**)
1 kHz (0.1 kHz**)
1 kHz (0.1 kHz**)
POWER
ON/OFF
¿/÷
– |¿/÷| +