Sony ICF-SW07 Mode D'emploi page 40

To wake up to the buzzer
If a STANDBY MEMORY without a frequency preset is activated, the
buzzer sounds at the standby time. Erase if a frequency is preset.
STANDBY
MEMORY
a/b
1
Press POWER ON/OFF to turn on the radio.
2
Press STANDBY MEMORY a or b.
The preset frequency is recalled.
If no frequency is stored, a beep sounds and "MEMORY"
"EMPTY" appears in the display. Go to step 4.
3
Hold down ERASE.
The Standby Memory number flashes in the display while ERASE
is held down.
A beep sounds after 3 seconds and the station assigned to the
STANDBY MEMORY button is erased. The Standby Memory
number and the Standby Memory label disappear.
4
Follow steps 4 to 6 of "Waking up to the radio or
buzzer", page 38 to set the standby time (i.e., the time
the buzzer is to sound).
The buzzer sounds at the standby time.
To stop the buzzer
Press any button except LIGHT.
The buzzer stops after about 60 minutes if it is left on.
Notes
• The buzzer volume cannot be adjusted with VOL.
• The Standby Memory buzzer sounds regardless of the BEEP OFF
setting.
• When a Standby Memory preset is erased, any changes to its default
label is erased as well.
GB
40
Other operations
ABC DEF
1 2
FM/
AM
JKL MNO
4 5
AM BAND
STU VWX
LOCAL/
7 8
WORLD
<>
/ DISPLAY
LABEL EDIT
0
DIRECT
TIMERSTANDBY/ TIME SET
STANDBY TIME SET TIME DIFF
a b
STANDBY MEMORY
SW STATION CALL
MY DW VOA
POWER
GHI
ON/
3
SYNC
OFF
PQR
6 SSB SLEEP
YZ
DST
9 ERASE
LIGHT
TIME SET
EXE
ENTER
JOG/
TUNE/
SCAN˚
BBC OTH
POWER
ON/OFF
ERASE