Setting The Clock; Setting The Local Time - Sony ICF-SW07 Mode D'emploi

Setting the clock

Setting the Local Time

Set the clock if "0:00" flashes in the display (i.e., when you installed the
batteries for the first time or after you reset the clock). Set the clock with
the radio turned off.
LOCAL time signifies the time for your time zone, while WORLD time is
the time for any other time zone in the world.
Clock adjustment is done in LOCAL time. Before setting the clock, refer
to the table on page 15 and check the time difference between your area
and the UTC (Coordinated Universal Time). Names of major cities and
their time differences from the UTC are preset in the unit's memory.
1
If the radio is turned on, press POWER ON/OFF to
turn it off.
2
Hold down TIME SET and press ¿ or ÷ to choose a
city or the time difference between your local time and
the UTC.
When TIME SET is pressed, the clock display will automatically
switch to LOCAL time if WORLD time had been displayed.
The LOCAL indication flashes. Each
time you press ¿ or ÷, the time
zone indicator will move to the right
or left.
When you release TIME SET, LOCAL
indication will stop flashing and light
up. Your local time zone has been selected.
3
Press DST if your area is now under daylight saving
time.
s appears in the display.
If daylight saving time is not used in your area, or if s is already
displayed, skip this step.
GB
12
Preparation
ABC DEF GHI
1 2
FM/
AM
JKL MNO PQR
4 5
AM BAND
STU VWX YZ
LOCAL/
7 8
WORLD
<>
/ DISPLAY
LABEL EDIT
0 EXE
DIRECT
TIMERSTANDBY/ TIME SET
STANDBY TIME SET TIME DIFF
a b
STANDBY MEMORY
SW STATION CALL
MY DW VOA
POWER
ON/
3
SYNC
OFF
6 SSB SLEEP
DST
9
ERASE
LIGHT
TIME SET
ENTER
JOG/
TUNE/
SCAN˚
BBC OTH
POWER
ON/OFF
DST
TIME SET
¿/÷
– |¿/÷| +