Table des Matières
Publicité
Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
Residual risk!
People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING:
To ensure safety and reliability, all
repairs and replacements should be performed by a
qualified service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they
give are no substitutes for proper accident prevention
measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed.
We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Indicates DANGER,
Indicates a potential personal
Safety Alert
injury hazard.
To reduce the risk of
Read
injury, user must read and
Operator's
understand operator's manual
Manual
before using this product.
Always wear ear protection
Wear Ear
and safety goggles or safety
and Eye
glasses with side shields
Protection
and a full face shield when
operating this product.
Blade
20cm
length of
Blade length of edger
edger
Keep
Ensure that other people
Bystanders
and pets remain a certain
15m
at a Safe
distance away from the
Distance
edger when it is in use.
Direction of
Indicates the direction of the
Edger Blade
edger blade rotation.
Rotation
Edger debris can affect
Thrown
stable footing. Use extreme care
Objects
when walking in edging area.
Wear non-slip safety
Wear Safety
footwear when using this
Footwear
equipment.
Rotating
Do not put hands or feet near
Cutting
or under rotating parts.
Blade
To prevent electrocution,
Keep
do not operate within 15m
sufficient
of overhead electrical lines.
distance
Contact with or use near
away from
power lines may cause
electrical
serious injury or electric
power lines
shock resulting in death.
This product is in
CE
accordance with applicable
EC directives.
Waste electrical products
should not be disposed of
WEEE
with household waste. Take
to an authorized recycler.
EDGER ATTACHMENT — EA0800
EN
5
Publicité
Table des Matières
