Table des Matières
Publicité
TROUBLE SHOOTING
EN
PROBLEM
Motor fails to start.
Power head stops
during operation.
Uneven edge
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
12
EDGER ATTACHMENT — EA0800
CAUSE
◾
The battery pack is not attached to the
power head.
◾
No electrical contact between the power
head and the battery pack.
◾
The battery pack is depleted.
◾
The lock-off button and trigger are not
depressed simultaneously.
◾
The motor is overloaded.
◾
The battery pack or the power head is
too hot.
◾
The battery pack is disconnected from
the tool.
◾
The battery pack is depleted.
◾
Grass or soil edged is too wet.
◾
Blade guard is clogged.
SOLUTION
◾
Attach the battery pack to the power
head.
◾
Remove the battery, check contacts
and reinstall the battery pack until it
snaps into place.
◾
Charge the battery pack with EGO
chargers listed in this manual.
◾
Press down the lock-off button and
hold it, then depress the trigger to turn
on the power head.
◾
The motor will recover when the load
is removed. For continuous working,
decrease the load of the power head.
◾
Allow the battery pack or power head
to cool until the temperature drops
below 67°C.
◾
Re-install the battery pack.
◾
Charge the battery pack with EGO
chargers listed in this manual.
◾
Avoid edging in wet soil or wet grass.
◾
Stop the motor, remove the battery
pack, and remove debris from the
blade guard.
Publicité
Table des Matières
