Proper Operation - EINHELL GH-PM 40 P Instructions De Montage Et Mode D'emploi

Masquer les pouces Voir aussi pour GH-PM 40 P:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Anleitung_GH_PM_40_P_SPK1__ 08.08.14 10:49 Seite 22
GB
any rotating parts. Keep clear of the chute
opening at all times.
17. Never lift or carry a lawn mower with the engine
running.
18. Switch off the engine and pull the spark plug
boot:
- before you dislodge any blockages or clogs in
the chute.
- before carrying out any checks, cleaning,
maintenance or other work on the lawn mower
- if the lawn mower strikes a foreign body,
examine it for signs of damage and carry out any
necessary repairs before restarting and
continuing to work with the mower. If the lawn
mower begins to experience exceptionally strong
vibrations, immediately switch it off and check it.
19. Switch off the engine:
- when you leave the lawn mower.
- before you refuel.
20. When you switch off the engine, move the speed
lever to the Off position. Close the petrol
stopcock.
21. Operation of the machine at higher than normal
speed can lead to an increased risk of accidents.
22. Take care when carrying out installation work on
the machine, and avoid trapping fingers between
the moving cutting tool and the fixed parts of the
machine.
Maintenance and storage
1. Make sure that all nuts, bolts and screws are
tightened securely and that the machine is in
safe working condition.
2. Never store the mower (with petrol in the tank)
inside a building in which petrol fumes could
come into contact with open flames or sparks.
3. Allow the motor to cool before you put the lawn
mower in an enclosed area.
4. In order to avoid fire hazards, keep the engine,
exhaust and the area around the fuel tank free
from grass, leaves and leaking grease (oil).
5. Routinely check the grass basket for signs of
wear and impaired functionality.
6. For your own safety, replace worn or damaged
parts without delay.
7. If the fuel tank should require emptying this
should only be done in the open air using a
petrol suction pump (available from DIY shops).
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
22
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the symbols on the machine
(fig. 28):
1) Read the operating instructions
2) Important! Danger from catapulted parts. Keep a
safe distance.
3) Important! Switch off the engine and pull the
spark plug boot before doing any maintenance,
repair, cleaning or adjustment work.
4) Fill with oil and fuel before starting the mower.
5) Caution! Wear ear protection and safety goggles.
6) Engine start/stop lever (I=Engine on; 0=Engine
off)
2. Layout (Fig. 1-3)
1
Engine start/stop lever (engine brake)
2
Control lever for engine adjustment (throttle
lever/choke)
3
Upper push bar
4
Lower push bar
5
Petrol tank
6
Air filter
7
Spark plug
8
Oil dipstick
9
Flap for the grass basket
10 Grass basket
11 Starter cord
12 Lawn mower with engine
13 Spark plug wrench
14 Bolts for spark plug wrench
15 Screw for cable holder
16 2x screws for installing the lower push bar
17 2x screws for installing the upper push bar
18 2x star nuts
19 Metal bracket for hooking on the starter cord
20 2x nuts
21 1x cable tie

3. Proper operation

The petrol lawn mower is intended for private use i.e.
for use in home and gardening environments.
Private use of the lawn mower refers an annual
operating time generally not exceeding that of 50
hours, during which time the machine is primarily
used to maintain small-scale, residential lawns and
home/hobby gardens. Public facilities, sporting halls,
and agricultural/forestry applications are excluded.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

34.010.13

Table des Matières