Maintenance And Storage - Ribimex RIBITECH PRBAT20 Manuel D'instructions Et D'utilisation

VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that switch is set on the "OFF" position,
remove the battery and unplug the charger from its power source.
Reminder: Make sure to maintain the machine in good working condition, carry out regular maintenance
of the machine after each use and before storage .Any breach or default of adequate maintenance reduces
the life of the machine and increases the risk of breakdowns and accidents.
To preserve the security system throughout the life of the machine, it is important to perform maintenance
and proper cleaning, DO NOT use non-compliant replacement parts and do NOT dismantle yourself the
machine or change the security features.
6.1- Cleaning
a) Clean the plastic parts with a soft and clean cloth.
Do not use aggressive cleansing agents (solvents, abrasive cleansers) or an abrasive sponge or any sharp
objects.
- Do not use any caustic chemicals to clean the plastics parts.
- Never put or immerse the product in water or any liquid, and ensure that water does not penetrate the tool
or the charger.
Never splash with water or clean with high pressure hose.
b) Clean shaft with a soft dry brush.
c) Clean ventilation holes with soft dry brush.
6.2- Storage
- Clean tool before storage.
- Keep product, user manual and accessories in the original packaging.
- It is recommended to store the product in a clean, dry location, protected from frost, and keep it out of
children's reach (e.g. lock it up).
- Do not store product in temperatures lower than 0ºC (32ºF).
- Do not place or store any object on top of the product.
6.3- Disposal
- Battery: do not throw with household rubbish or into fire or in the environment. Dispose of used battery in
provided collecting centres.
- Tool and charger: do not dispose with household garbage. Do not throw into the environment.
Dispose of the product in a collection centre for waste of electrical and electronic equipment, or a waste
drop-off centre; or seek advice from your local municipality.
- Proceed with disposal of the tool, accessories and packaging according to local regulations regarding the
protection of the environment.
Page 31 / 49