Reset Factory Settings - Fracarro D-Matrix 4S Instructions D'emploi

5.3 SAVE A CONFIGURATION
From the menu OPERATIONS -> SAVE CONFIGURATION -> ON FILE / ON USB DRIVE you can
access the pages to save the configuration directly to files, PC or a USB drive.
Click on the disk icon to automatically save an XML file containing the complete D-Matrix
configuration directly on the PC.
5.4 RESET A CONFIGURATION
Once one or more configuration files have been saved on the PC or USB drive, the configuration
can be loaded into the D-Matrix: from the menu OPERATIONS -> LOAD CONFIGURATION
-> FROM FILE / USB DRIVE you can access the configuration reset/load pages, respectively
directly on files on the PC or a USB drive:
Select the saved configuration file and confirm the download by clicking on "Download
configuration".

5.5 RESET FACTORY SETTINGS

From the menu OPERATIONS -> FACTORY DEFAULT the product parameters set in the factory
can be reset.
Below the default LAN parameters:
CU SETUP
Fig. 15
Fig. 16
NETWORK ENABLE DHCP
NETMASK
GATEWAY
WEB SERVER PORT
MAC ADDRESS
54
IP
255.255.255.0
DNS
NO
192.168.0.2
192.168.0.1
0.0.0.0
80
--