Fracarro D-Matrix 4S Instructions D'emploi page 53

This screen is used to set the following parameters:
• Time reference: to give a synchronisation time reference by selecting INPUT 1, INPUT 2,
INPUT 3, INPUT 4, USB). (e.g. time, EPG, etc.)
• Enabled LCN: enable by flagging the box or deactivate the LCN and then order the programs
according to their signed priority.
• Auto SID Remapping: if enabled this innovative function allows automatically resetting a
new progressive SID to the programs, and to change the output program list without having
to conduct a new channel search in the TV.
• Auto program name: if enabled this innovative function allows automatically resetting a new
progressive name to the programs by writing it in the space (base name), e.g. program 1,
program 2, etc.
• Auto LCN: if enabled this function allows setting a base LCN number that is assigned to
the first program in the list, the following ones will then be set automatically in a sequence
from the base number.
• LCN country: select the country for setting the LCN.
After, certain advanced signal parameters can be viewed: Original Network ID, Network ID, and
the Private Data Specifier Descriptor.
Other parameters like Transport Stream ID, Network Name, Cell ID can be set and changed by
writing the new number in the space.
NB: click on "Apply" to make the changes effective.
5.2.6 SETTINGS CONFIGURATION
From the menu CONFIGURATION->SETTINGS the general system configuration page can be
opened:
In this menu you can:
• Rename the system
• Change the access password
• Adjust the display contrast
• Change the network connection settings
NB: by changing and saving the settings you are automatically disconnected from the D-Matrix,
and to reconnect type in the new connection parameters into the browser.
Fig. 14
53