Order List - Fracarro D-Matrix 4S Instructions D'emploi

PROGRAMS
To select the programs that will be broadcast in the previously created MUX and monitor
the transmission band.
MUX1/MUX2: to select the MUX to be used.
ALL PIDS: to add to a program list all the channels received from one of the 4 inputs, transferring
all the data in the SAT transponder (PID video, PID audio, Teletext, etc.) to output.
NB: this function can be used when the input transport stream bitrate is much lower than
the available output bitrate (varies according to the modulation standard and configurations),
otherwise there could be serious decline in the output signal.
ORDER LIST: to set the order criteria for the program lists.
INPUT: ordered by classification to the input number (input 1, input 2, input 3, input 4).
LCN: ordered by LCN, i.e. according to the number associated to the program no
matter what input it comes from.
PRIORITY: ordered by priority, i.e. according to the priority assigned to the program
(see the paragraph Programming Indications).
PROGRAM LIST: to set the list of output programs.
ADD: to add the selected program to the list of output programs. When it has been
added the program is marked with an (A) in front of its name in the channel list.
If the program is added and decrypted it is marked with an (A*) in front of its name in
the channel list.
42