Fracarro D-Matrix 4S Instructions D'emploi page 49

Information is given about the CAM module, the Smart Card and the last release of the CAM
software can be downloaded if it is available.
By clicking on Advanced Settings the following screen opens:
Which enables changing the advanced CAM module functions. The first 2 items, CAPMT
Management and CAPMT Sending, enable changing the decrypt management for the CAM,
choosing from the options in the dropdown menu. If the third item CAPMT Resize is flagged,
the CAM is set to decrypt just the audio and video of a program (in this case, the number of
decrypted programs could be higher). If it is not flagged everything is decrypted: audio, video,
ttx, subtitles, MHP, etc.
5.2.4 OUTPUT MUX CONFIGURATION
In the menu CONFIGURATION->OUTPUT->MUX1 / MUX2 you can access the output mux
configuration page modulated according to the DVB-T or DVB-C standards, and the relative
parameters are shown.
First of all specify the modulation standard to use (DVB-T or DVB-C).
Fig. 8
Fig. 9
49